S100

This is our third one lamp.

After power-on, click the ON/OFF key to turn on the light or slide the sensing area with your palm to turn on the light.

How to adjust the brightness?

There are 7 levels of brightness adjustment in total, (digital display is 07/10/13/16/19/20/25, which represents the illumination level from low to high). Click the brightness adjustment key, start the dimming function, when the brightness is adjusted to the maximum or minimum brightness, the reverse dimming will be started if you continue to click the brightness adjustment key.

Also we can induction dimming palm stays in the sensing area for 1-2 seconds to adjust the brightness, starts the dimming mode, when the brightness is adjusted to the maximum or minimum brightness, the reverse dimming will be started If you continue to keep the palm in the sensing area. When the proper brightness is reached ,Just put your palm down.

The max brightness is 25000 lux, and min brightness is 6000lux.

How to turn on/off the anti-cure mode?

Click the anti-cure key to turn on the anti-cure lighting mode. In this case, the bule component of the light is filtered out and the composite material can be used for a long time. Slide right to normal operation mode.

How to adjusting the color temperature?

Click the color temperature adjustment key to change the color temperature. The indicator light blue, green and red represent cold whit, positive white and warm white.

This lamp has a few things in common with the first one

this lamp also has a brightness memory function, which will enable the brightness of the last off when it is turned on to work.

Both sides of the outer handle, press the top of the Bowen button to pull out, the handle can be removed, easy to clean and disinfect.

Its LED chip also is imported from Germany Osrm.

The color rendering index is more than 90.