FMS-500MA

Experienced digital x-ray manufacturer, customized DR solution

SYSTEM CONFIGURATION

Easy Power Supply

220VAC single phase power, easy connection with ordinary civil power. Generator with PSU technology(capacitor) are constantly supply reliable performance with unstable power.

Fast Installation

The most classic design of dual telescopic stand, greatly reduce the limitation of the space requirement.

High Resolution

17x17 full size detector acquires high quality image with 140um pixels, offer accurate diagnosis assistance in checking up.

High-efficient workflow

Remote control system with synchronization, optimize the workflow to serve more examinations in high efficient.

WIFI Flat Panel Detector

Detector: Wireless detector

Detector technology: Cesium iodide (CsI)scintillator coupled to TFT matrix with amorphous silicon technology

Image Size: 43×43 cm (17×17 inch)

Pixel Matrix: 3072×3072

Pixel Pitch: 140 μm

A/D Conversion: 16 bits

DQE: 2μGy at 0 lp/mm 65%

Spatial Resolution: 3.6 LP/mm

Image Acquisition Time: 2s

Image Processing Time: 3s

Recommended cycle time:10s

X-ray Voltage Range: 40-150 KV

Data Interface: GigE /802.11ac

Power Dissipation: 20 W

Adapter Input: AC 100-240V,50-60Hz

Adapter Output: DC 24V, 60W

Dimensions: 46×46×1.5 cm

Weight: 4.3 kg

Max. load capacity 150 kg with patient lying on it; 100 kg with patient standing

Battery: Lithium ion, build in, rechargeable,3200mAh 2 pieces

Charging time: 240 minutes for 100 % battery capacity

Battery Standby Time: 8H

Housing Material: Carbon, Alloy

Water Tightness: IPX4

Operating Environment: 5-35 ºC,10-75% RH

DXRay Diagnostic Workstation

Diagnostic workstation

CPU: Dual Core 2.8GHZ；

Image Capture Memory: 4GB，Hard Drive: 500GB

Monitor: 24inch, Resolution: 1920*1200 pixels

CD/DVD recording/burning

DXRayDiagnost software

Case management function: including the management of patient information, exam information and images.

Worklist enquiry service following standard DICOM3.0 may inquiry from HIS/PACS and download case information. 

Image acquisition

Acquisition system: positive and negative film image capture can be configured;

Real time automatic window width level adjustment;

Real time ROI (region of interests) clipping;

Real time enhancement;

Selecting image and rotation according to different body postures;

Displaying patient information, examination information, device information and image information

Image processing

Adjustment of window width, window level, Gamma, and LUT curve.

Positive and negative film switchover, image zoom, translation, mirror image, rotation, magnified display;

Image enhancement, noise reduction: Scheme and level of image enhancement and noise reduction can be adjusted according to different body postures.

Image labeling function: including drawing straight line, rectangle, polygon, arrow and text;

Real time reminding the free space of image disk of the system.

RT prompt system can be used for store size of the disk space of image.

Image output

Sending SCU with DICOM: support sending image to any PACS and workstations following Standard DICOM3.0;

Receiving SCP server with DICOM: support receiving image following Standard DICOM3.0 from any workstation.

Image Stitching

Great clinical significance for orthopaedic department to obtain important diagnostic basis before clinical operation and provide accurate reference for postoperative evaluation.

Advanced Feature

Emergency mode: it can supply emergency exposure without registration

Check-up mode: it can import and register patient information by excel

Reject analysis: Image cancel / delete image / Statistic of use.

High frequency generator

Nomina supply voltage(50/60Hz): single-phase AC:220

Nomina Electric Power: 50KW (capacitor bank type) (100kV×500mAx0.1s)

Input power: 2KVA, 6A

Short time rating: 150kV@320mA，100kV@500mA

Tube votage: 40 to 150kv, 1kv step

Tube current: 100 to 500ma (100,200,320,400,500)

MAs: 1 to 280mas

Time range: 0.002-6.3s

Weight: 120kg ( Load per unit area: 372.6 kg/㎡)

Dimension: 762x423x676

X-Ray Tube

Target Material: Lawrencium-tungsten Molybdenum

Target angle:12°

Focal Spot Sizes：0.6 / 1.2 mm

X-Ray coverage：354mmX354mm when SID is 835mm

Permanent filtration: 0.9mmAl/75kw IEC60522/2003

Max Output Voltage:150KV

Power: 20KW/50KW

Anode heat storage:210kJ/300KHU

Max. heat content: 900 kJ (1250 KHU)

Max. anode heat dissipation rate: 750 W (1060 HU/s)

Anode rotation: 2800 rpm/min

Collimator

Max. operating voltage of X-ray tube：150kV

Power supply：24VAC 6A

Average illumination (at SID=100cm): 160 lx or more

Illumination duration: Continuously for 30seconds (automatically turn off)

Light source time limit：30s±5s

Inherent filtering (70kV): 1.0mm Al

Attached filter (70kV): 0.5 /1.0/1.5mm Al (switch inside)

Output window organic glass plate filter (70kV): 0.2 mm Al

Lead door control method: Manual

Distance from focal spot to installation surface: 60mm

Weight: 7.5Kg±0.2Kg

Dimensions (LxWxH): 257mm×185mm×178mm

Synchronized column

Remote control to synchronize up/down movement by motor drive

Height adjust range: 1090-1850mm (lifting speed 40mm/s)

SID: 1800mm

Dimension of detector stand: 550mmx450mmx1850mm

Total weight of detector stand: 50kg (Load per unit area: 202kg/㎡)

Dimension of x-ray tube stand: 450mmx480x1850mm

Total weight of x-ray tube stand: 65kg (Load per unit area:300.9 kg/㎡)